Timken Tapered Bearing Cup & Cone Kit - Set 413 (HM212049 / HM212011)
SKU: AP0608KT
Category: Axle Assembly Parts, Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, DANA SPICER EARLY AXLE 12.25” X 7.5” BRAKE, DANA SPICER STD.FORGE LATE AXLE, Fuwa Fb24 Hd Disc Brake Axle, Hendrickson Conventional Hn Disc Brake, Hendrickson Hxl2 & Hxl5 Hn Disc Brake 19.5 & 22.5, HENDRICKSON INTRAAX QUICK CHANGE BRAKES, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong, Wheel Bearing Kits, YORK 2782 & 2784 AXLES 16.5” X 7” BRAKE, York 2950 Axle 335Mm X 210Mm Brake
PART NO : AP0608KT
SET 413
(HM212049 - HM212011)
Timken Outer Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0608KM
APPLICATION
USTRALIAN TANNER ATN20” / ATN 15”
COLRAIN TQ20”
DANA / SPICER / HENDRICKSON EARLY TYPE 15” & 20”
DANA / SPICER / HENDRICKSON D21 & K21 15” & 20”
DANA / SPICER / HENDRICKSON D22 TAPER SPINDLE & K22 15” & 20” FREIGHTER EATON E34 15”
FREIGHTER A19H 15”
FREIGHTER EATON JE07-L & JE501-L 20“
FREIGHTER - INGERSOLL A22H, F22H 15” & 20”
HAULMARK - ROCKWELL MERITOR TL RUBERY OWEN
HAULMARK - DANA D21 & K21 15” & 20”
HAULMARK - DANA D22 ROCKWELL MERITOR TN 20”
HOLLAND TAPER SPINDLE 20”
KIC SUDISA TN20”
KRUEGER - DANA D22
ROCKWELL / MERITOR TK, TKD 20”
ROCKWELL / MERITOR ARN, ATN, RN, TN, TQ 15” & 20”
ROCKWELL / MERITOR ATL, TKL, TL, TLD, RL 15” & 20”
ROR TN 15” & 20”
RUBERY OWEN EARLY T SERIES SPIDER 20”
RUBERY OWEN LATE U SERIES SPIDER 15” & 20”
STANDARD FORGE EARLY TYPE 15” & 20”
TRAIL QUIP ATN 15” & 20”
YORK 782, 784, 20” & 783 15”
DANA / SPICER I-100, I-120, I-140 & W15 / DANA / SPICER I-150S EATON EFA-12F3, 12F4, 13F4
MERITOR FG941
SPECIFICATIONS
Cone Part Number : HM212049
Cup Part Number : HM212011
Design Units : Imperial
Bearing Weight : 1.8kg
Cage Type : Stamped Steel
BEARING DIMENSIONS
d - Bore : 66.675 mm
D - Cup Outer Diameter : 122.238 mm
B - Cone Width : 38.354 mm
C - Cup Width : 29.718 mm
T - Bearing Width : 38.100 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 3.560 mm
r - Cup Backface "To Clear" Radius2 : 3.30 mm
da - Cone Frontface Backing Diameter : 75.44 mm
db - Cone Backface Backing Diameter : 82.04 mm
Da - Cup Frontface Backing Diameter : 116.10 mm
Db - Cup Backface Backing Diameter : 107.95 mm
Ab - Cage-Cone Frontface Clearance : 3.8 mm
Aa - Cage-Cone Backface Clearance : 1.8 mm
a - Effective Center Location3 : -10.9 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 69200 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 267000 N
C0 - Static Radial Rating : 279000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 40000 N
FACTORS
K - Factor7 : 1.73
e - ISO Factor8 : 0.34
Y - ISO Factor9 : 1.78
G1 - Heat Generation Factor (Roller-Raceway) : 92.2
G2 - Heat Generation Factor (Rib-Roller End) : 18.1
Cg - Geometry Factor : 0.0759
RECENTLY VIEWED PRODUCTS