Timken Tapered Bearing Cup & Cone Kit - Set 414 (HM218248 / HM218210)
SKU: AP0610KT
Category: Axle Assembly Parts, Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, DANA SPICER STD.FORGE LATE AXLE, Hendrickson Conventional Hn Disc Brake, Hendrickson Hxl2 & Hxl5 Hn Disc Brake 19.5 & 22.5, HENDRICKSON INTRAAX QUICK CHANGE BRAKES, SAF J-SERIES RZ 12242/18C, RZ10242/18C, Truck Parts Penrith, Wheel Bearing Kits, YORK 2782 & 2784 AXLES 16.5” X 7” BRAKE, York 2950 Axle 335Mm X 210Mm Brake
PART NO : AP0610KT
SET 414
(HM218248 / HM218210)
Timken Inner Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0610KM
APPLICATION
AUSTRALIAN TANNER ATN20”
COLRAIN TQ20”
DANA / SPICER / HENDRICKSON D22 TAPER SPINDLE & K22 15” & 20” FREIGHTER EATON JE07-L & JE501-L 20“
FREIGHTER - INGERSOLL A22H, F22H 15” & 20”
HAULMARK - DANA D22
HOLLAND TAPER SPINDLE 20”
KIC SUDISA TN20”
KRUEGER - DANA D22
MOSS METRIC AND LOW LOADER
ROCKWELL / MERITOR TN20”
ROCKWELL / MERITOR ARN, ATN, RN, TQ 15” & 20”
ROR TN 15” & 20” / ROR TM 20”
TRAIL QUIP ATN 15” & 20”
YORK 782, 784, 20” & 783 15” / YORK 160 20” / YORK 160 LOW LOADER
SPECIFICATIONS
Cup Part Number : HM218210
Cone Part Number : HM218248
Design Units : Imperial
Bearing Weight : 2.5kg
Cage Type : Stamped Steel
DIMENSIONS
d - Bore : 89.974 mm
D - Cup Outer Diameter : 146.975 mm
B - Cone Width : 40.000 mm
C - Cup Width : 32.499 mm
T - Bearing Width : 40.000 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 7.110 mm
r - Cup Backface "To Clear" Radius2 : 3.56 mm
da - Cone Frontface Backing Diameter : 99.06 mm
db - Cone Backface Backing Diameter : 112.01 mm
Da - Cup Frontface Backing Diameter : 141.00 mm
Db - Cup Backface Backing Diameter : 133.10 mm
Ab - Cage-Cone Frontface Clearance : 3.6 mm
Aa - Cage-Cone Backface Clearance : 1 mm
a - Effective Center Location3 : -8.6 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 84200 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 325000 N
C0 - Static Radial Rating : 388000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 47900 N
FACTORS
K - Factor7 : 1.76
e - ISO Factor8 : 0.33
Y - ISO Factor9 : 1.8
G1 - Heat Generation Factor (Roller-Raceway) : 168
G2 - Heat Generation Factor (Rib-Roller End) : 34.7
Cg - Geometry Factor : 0.0921
RECENTLY VIEWED PRODUCTS