Timken BPW Tapered Bearing Cup & Cone Kit - 33217
SKU: AP0632T
Category: Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong, Wheel Bearing Kits
PART NO : AP0632T
33217
Timken BPW Inner Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
APPLICATION
BPW EHZ9000
SPECIFICATIONS
Cup Part Number : Y33217
Cone Part Number : X33217
Design Units : Metric
Bearing Weight : 3.6kg
Cage Type : Stamped Steel
DIMENSIONS
d - Bore : 85 mm
D - Cup Outer Diameter : 150 mm
B - Cone Width : 49.000 mm
C - Cup Width : 37.000 mm
T - Bearing Width : 49.000 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 2.540 mm
r - Cup Backface "To Clear" Radius2 : 2.03 mm
da - Cone Frontface Backing Diameter : 93.98 mm
db - Cone Backface Backing Diameter : 103.12 mm
Da - Cup Frontface Backing Diameter : 145.03 mm
Db - Cup Backface Backing Diameter : 134.11 mm
Ab - Cage-Cone Frontface Clearance : 4.1 mm
Aa - Cage-Cone Backface Clearance : 4.8 mm
a - Effective Center Location3 : -11.7 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 108000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 416000 N
C0 - Static Radial Rating : 483000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 77300 N
FACTORS
K - Factor7 : 1.4
e - ISO Factor8 : 0.42
Y - ISO Factor9 : 1.43
G1 - Heat Generation Factor (Roller-Raceway) : 167.6
G2 - Heat Generation Factor (Rib-Roller End) : 33.3
Cg - Geometry Factor : 0.0995
RECENTLY VIEWED PRODUCTS