Timken BPW Tapered Bearing Cup & Cone Kit - 33118
SKU: AP0650T
Category: Axle Assembly Parts, Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, BPW BRAKE 95 LIGHTWEIGHT AXLE 420 X 180MM, BPW ECO HUB, BPW ECO HUB H, R, KH, & NR. 9 & 10 TONNE, Bpw Eco Plus 3 Hub Disc Brake Axle, BPW ECO PLUS HUB - H, KH / 9 & 10-12 TONNE, Bpw Eco Plus Hub Disc Brake Axle 10-12 Tonne, BPW ECO PLUS HUB DISC BRAKE AXLE 9-12 TONNE, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong, Wheel Bearing Kits
PART NO : AP0650T
33118
Timken BPW Inner Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0650M
APPLICATION
BPW 10 - 12 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
SPECIFICATIONS
Cup Part Number : Y33118
Cone Part Number : X33118
Design Units : Metric
Bearing Weight : 3.1kg
Cage Type : Stamped Steel
DIMENSIONS
d - Bore : 90 mm
D - Cup Outer Diameter : 150 mm
B - Cone Width : 45 mm
C - Cup Width : 35 mm
T - Bearing Width : 45 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 2.540 mm
r - Cup Backface "To Clear" Radius2 : 2.03 mm
da - Cone Frontface Backing Diameter : 100.08 mm
db - Cone Backface Backing Diameter : 107.95 mm
Da - Cup Frontface Backing Diameter : 146.05 mm
Db - Cup Backface Backing Diameter : 134.87 mm
Ab - Cage-Cone Frontface Clearance : 3.8 mm
Aa - Cage-Cone Backface Clearance : 4.8 mm
a - Effective Center Location3 : -9.4 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 94100 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 363000 N
C0 - Static Radial Rating : 447000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 64000 N
FACTORS
K - Factor7 : 1.47
e - ISO Factor8 : 0.4
Y - ISO Factor9 : 1.51
G1 - Heat Generation Factor (Roller-Raceway) : 180.1
G2 - Heat Generation Factor (Rib-Roller End) : 43.2
Cg - Geometry Factor : 0.1
RECENTLY VIEWED PRODUCTS