Timken Bearing Cone - 3782
SKU: AP0642T
Category: Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, Individual Wheel Bearings, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong
PART NO : AP0642T
3782
Timken Outer Cone Bearing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
SPECIFICATIONS
Cone Part Number : 3782
Design Units : Imperial
Cage Type : Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 : 213000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 : 55100 N
BEARING DIMENSIONS
Bore (d) : 44.450 mm
Cone Width (B) : 30.302 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius3 : 3.600 mm
da - Cone Frontface Backing Diameter : 52 mm
db - Cone Backface Backing Diameter : 58 mm
Ab - Cage-Cone Frontface Clearance : 1.5 mm
Aa - Cage-Cone Backface Clearance : 1.5 mm
a - Effective Center Location4 : -8.1 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)5 : 31700 N
C1 - Dynamic Radial Rating (1 million revolutions)6 : 122000 N
C0 - Static Radial Rating : 153000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 : 18300 N
FACTORS
K - Factor8 : 1.73
G1 - Heat Generation Factor (Roller-Raceway) : 49.9
G2 - Heat Generation Factor (Rib-Roller End) : 14.5
Cg - Geometry Factor : 0.0903
RECENTLY VIEWED PRODUCTS