Timken Tapered Bearing Cup & Cone Kit - Set 415 (HM518445 / HM518410)
SKU: AP0615KT
Category: Axle Assembly Parts, Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, FRUEHAUF PRO-PAR - 12.25” X 8” BRAKE, Fuwa Kf23 Disc Brake Axle, Hendrickson Hxl7 Hp Disc Brake Wheel End - 22.5, MERITOR DX & EX SERIES, AIR DISC BRAKE CS9 / 10.5, SAF KEDI AXLES, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong, Wheel Bearing Kits
PART NO : AP0615KT
SET 415
(HM518445 / HM518410)
Timken Inner Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0615KM
APPLICATION
DANA / SPICER / HENDRICKSON P22 PARALLEL SPINDLE 15” & 20” FRUEHAUF PROPAR 15“ & 20“
HOLLAND PROPAR 20“ PARALLEL SPINDLE
YORK HEAVY DUTY OUTBACK 20”
SPECIFICATIONS
Cup Part Number : HM518410
Cone Part Number : HM518445
Design Units : Imperial
Bearing Weight : 2.8kg
Cage Type : Stamped Steel
DIMENSIONS
d - Bore : 88.900 mm
D - Cup Outer Diameter : 152.400 mm
B - Cone Width : 39.688 mm
C - Cup Width : 30.163 mm
T - Bearing Width : 39.688 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 6.35 mm
r - Cup Backface "To Clear" Radius2 : 3.30 mm
da - Cone Frontface Backing Diameter : 100.08 mm
db - Cone Backface Backing Diameter : 112.01 mm
Da - Cup Frontface Backing Diameter : 147.10 mm
Db - Cup Backface Backing Diameter : 136.91 mm
Ab - Cage-Cone Frontface Clearance : 4.1 mm
Aa - Cage-Cone Backface Clearance : 2.8 mm
a - Effective Center Location3 : -6.4 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 76900 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 297000 N
C0 - Static Radial Rating : 404000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 52900 N
FACTORS
K - Factor7 : 1.45
e - ISO Factor8 : 0.4
Y - ISO Factor9 : 1.49
G1 - Heat Generation Factor (Roller-Raceway) : 162
G2 - Heat Generation Factor (Rib-Roller End) : 33.7
Cg - Geometry Factor : 0.0966
RECENTLY VIEWED PRODUCTS