Timken Tapered Bearing Cup & Cone Kit - Set 403 (594A / 592A)
SKU: AP0646KT
Category: Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong, Wheel Bearing Kits
PART NO : AP0646KT
SET 403 (594A / 592A)
Timken Inner Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0646KM
APPLICATION
Eaton
Mack
Meritor
Rockwell
SPECIFICATIONS
Cup Part Number : 592A
Cone Part Number : 594A
Design Units : Imperial
Bearing Weight : 2.5kg
Cage Type : Stamped Steel
DIMENSIONS
d - Bore : 95.250 mm
D - Cup Outer Diameter : 152.400 mm
B - Cone Width : 36.322 mm
C - Cup Width : 30.163 mm
T - Bearing Width : 39.688 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 5.080 mm
r - Cup Backface "To Clear" Radius2 : 3.30 mm
da - Cone Frontface Backing Diameter : 103.89 mm
db - Cone Backface Backing Diameter : 113.03 mm
Da - Cup Frontface Backing Diameter : 145.03 mm
Db - Cup Backface Backing Diameter : 134.87 mm
Ab - Cage-Cone Frontface Clearance : 2.3 mm
Aa - Cage-Cone Backface Clearance : 3.8 mm
a - Effective Center Location3 : -2.5 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 56000 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 216000 N
C0 - Static Radial Rating : 319000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 42400 N
FACTORS
K - Factor7 : 1.32
e - ISO Factor8 : 0.44
Y - ISO Factor9 : 1.36
G1 - Heat Generation Factor (Roller-Raceway) : 151
G2 - Heat Generation Factor (Rib-Roller End) : 36.8
Cg - Geometry Factor : 0.142
RECENTLY VIEWED PRODUCTS