Timken Tapered Bearing Cup & Cone Kit - 33213
SKU: AP0633T
Category: Axle Assembly Parts, Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, BPW BRAKE 95 LIGHTWEIGHT AXLE 420 X 180MM, BPW ECO HUB, BPW ECO HUB H, R, KH, & NR. 9 & 10 TONNE, Bpw Eco Plus 3 Hub Disc Brake Axle, BPW ECO PLUS HUB - H, KH / 9 & 10-12 TONNE, Bpw Eco Plus Hub Disc Brake Axle 10-12 Tonne, BPW ECO PLUS HUB DISC BRAKE AXLE 9-12 TONNE, MERITOR DX & EX SERIES, AIR DISC BRAKE CS9 / 10.5, ROR BMX AXLE 350 X 200, SAF J-SERIES RZ 12242/18C, RZ10242/18C, Trailer Parts Melbourne, Truck Parts Penrith, Truck Spares Adelaide, Truck Spares Melbourne, Truck Spares Newcastle, Truck Spares Perth, Truck Spares Sydney, Truck Spares Wollongong, Truck Spares Wyong, Wheel Bearing Kits
PART NO : AP0633T
33213
Timken Outer Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0633M
APPLICATION
BPW : EHZ9000
BPW 6.5 - 9 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
BPW 10 - 12 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
BPW 10 - 12 Tonne : HL, HLS, HR, KH/HR, NH, NR, HL, HLS.
SPECIFICATIONS
Cone Part Number : X33213
Cup Part Number : Y33213
Design Units : Metric
Bearing Weight : 2kg
Cage Type : Stamped Steel
BEARING DIMENSIONS
d - Bore : 65.000 mm
D - Cup Outer Diameter : 120.000 mm
B - Cone Width : 41 mm
C - Cup Width : 32.000 mm
T - Bearing Width : 41.000 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 2.030 mm
r - Cup Backface "To Clear" Radius2 : 1.52 mm
da - Cone Frontface Backing Diameter : 73.91 mm
db - Cone Backface Backing Diameter : 78.99 mm
Da - Cup Frontface Backing Diameter : 115.10 mm
Db - Cup Backface Backing Diameter : 106.93 mm
Ab - Cage-Cone Frontface Clearance : 3.6 mm
Aa - Cage-Cone Backface Clearance : 2.8 mm
a - Effective Center Location3 : -11.2 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 67900 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 262000 N
C0 - Static Radial Rating : 280000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 45400 N
FACTORS
K - Factor7 : 1.5
e - ISO Factor8 : 0.39
Y - ISO Factor9 : 1.54
G1 - Heat Generation Factor (Roller-Raceway) : 90.3
G2 - Heat Generation Factor (Rib-Roller End) : 21.8
Cg - Geometry Factor : 0.0791
RECENTLY VIEWED PRODUCTS