Timken Tapered Bearing Cup & Cone Kit - 33213
SKU: AP0633T
Category: Axle Assembly Parts, Axle Parts, Bearings - Timken / Meritor / Bpw / Skf / Saf, BPW BRAKE 95 LIGHTWEIGHT AXLE 420 X 180MM, BPW ECO HUB, BPW ECO HUB H, R, KH, & NR. 9 & 10 TONNE, Bpw Eco Plus 3 Hub Disc Brake Axle, BPW ECO PLUS HUB - H, KH / 9 & 10-12 TONNE, Bpw Eco Plus Hub Disc Brake Axle 10-12 Tonne, BPW ECO PLUS HUB DISC BRAKE AXLE 9-12 TONNE, MERITOR DX & EX SERIES, AIR DISC BRAKE CS9 / 10.5, ROR BMX AXLE 350 X 200, SAF J-SERIES RZ 12242/18C, RZ10242/18C, Truck Parts Penrith, Wheel Bearing Kits
PART NO : AP0633T
33213
Timken Outer Cup & Cone Bearing Kit
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
MERITOR EQUIVALENT :
AP0633M
APPLICATION
BPW : EHZ9000
BPW 6.5 - 9 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
BPW 10 - 12 Tonne : Eco, HR, KH, KR, NH, NR. Eco, Eco-Max, Eco Plus. SH, SKH
BPW 10 - 12 Tonne : HL, HLS, HR, KH/HR, NH, NR, HL, HLS.
SPECIFICATIONS
Cone Part Number : X33213
Cup Part Number : Y33213
Design Units : Metric
Bearing Weight : 2kg
Cage Type : Stamped Steel
BEARING DIMENSIONS
d - Bore : 65.000 mm
D - Cup Outer Diameter : 120.000 mm
B - Cone Width : 41 mm
C - Cup Width : 32.000 mm
T - Bearing Width : 41.000 mm
ABUTMENT AND FILLET DIMENSIONS
R - Cone Backface "To Clear" Radius1 : 2.030 mm
r - Cup Backface "To Clear" Radius2 : 1.52 mm
da - Cone Frontface Backing Diameter : 73.91 mm
db - Cone Backface Backing Diameter : 78.99 mm
Da - Cup Frontface Backing Diameter : 115.10 mm
Db - Cup Backface Backing Diameter : 106.93 mm
Ab - Cage-Cone Frontface Clearance : 3.6 mm
Aa - Cage-Cone Backface Clearance : 2.8 mm
a - Effective Center Location3 : -11.2 mm
BASIC LOAD RATINGS
C90 - Dynamic Radial Rating (90 million revolutions)4 : 67900 N
C1 - Dynamic Radial Rating (1 million revolutions)5 : 262000 N
C0 - Static Radial Rating : 280000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 : 45400 N
FACTORS
K - Factor7 : 1.5
e - ISO Factor8 : 0.39
Y - ISO Factor9 : 1.54
G1 - Heat Generation Factor (Roller-Raceway) : 90.3
G2 - Heat Generation Factor (Rib-Roller End) : 21.8
Cg - Geometry Factor : 0.0791

RECENTLY VIEWED PRODUCTS